The Best Cooler / Toolbox Mounts for Your Polaris RZR

The Best Cooler / Toolbox Mounts for Your Polaris RZR

Adding a cooler and a toolbox to your RZR is a no brainer. The problem is there really are a ton of options these days and navigating which one is best can be quite the task. There is also the issue of what fits in a RZR?


Which Coolers fit in a Polaris RZR:

So which coolers fit? Well first lets go over the different RZR beds for different models.

1) Polaris RZR XP 1000 / XP Turbo Models

Polaris RZR XP Bed

2) Polaris RZR Turbo S Models

*Notice the difference in cage designs between the XP and Turbo S models.

Polaris RZR Turbo S

3) Polaris RZR 900 / 900 S / 1000 60 inch / 1000S (Pretty Much any 900 XP or Trail Models)

Polaris RZR 900 S Trail Bed

4) Polaris RZR Pro XP Models

Polaris RZR Pro XP Bed

Each of the models above are set up a bit differently and will only fit certain size cooler / toolbox combo's.

Use the table below to reference which coolers fit what model:

Cooler 900 Model  XP 1000 / Turbo S Pro XP
Ozark 26
Ozark 35
Yeti 20
Yeti 24 Roadie
Yeti 35
Lifetime 28
Titan Deep Freeze 20
Plano 21
Plano 32
Amazon 20
Grizzly 20
Grizzly 40
Orca 20
Orca 26
Orca 35
Canyon 22
Canyon 35

*Note: We tested each cooler with the RIGID Toolbox installed (Excluding 900 models) using our toolbox mounts. Some coolers may fit by themselves in the bed but we tend to break things on the trail and tools are a must for us.)

Please let us know if you've tried any additional cooler models in your RZR! We'd love to hear from you.


Next we'll get to which coolers we like most and have built mounts for.

Cooler Options:

Yeti 24 Roadie - $199.99

Polaris RZR Yeti 24 Quart Cooler

Yeti 35 - $249.99

Polaris RZR Yeti 35 Quart Cooler

Ozark Trail 26 - $88.00

Polaris RZR Ozark Trail 26 Quart Cooler


Ozark 35 - $97.00

 Ozark Trail 35 QT Cooler


RTIC 20 - $149.99

Polaris RZR RTIC 20 Quart Cooler


Polaris Northstar - $239.99

Polaris RZR Northstar 30 Quart Cooler

There are other coolers out there that will fit in the RZR but we have yet to make mounts for them thus far. If you would like a mount made for a specific cooler reach out to us on our website.

Here is a video of how our mounts work:

Our mounts are designed to mount your cooler closest to the rear of your RZR for easy accessibility and to provide enough room to also fit the RIGID or Milwaukee Packout toolbox in your rear tray. You can find our RIGID toolbox mounts here.

 Here is a look at our Ozark 26 Mount:The best way to mount a cooler in your Polaris RZR

To install any of our brackets simply open the cooler lid, slide the appropriate mount in the side slots, then anchor in place with a lock n ride. 


*If you are tired of your lock n ride falling out every time you remove your cooler we also make our own anchors that create a stud-that-stays!


Hope this information was helpful! If you have any questions please reach out to us or leave a comment and we will get to you as soon as we can!

UTV Driver also made a good detailed buyers guide you can find here for some more information on different coolers other people are using.


  • Litt Industries

    Hi Doug,

    We do not have any mounts for your 900 at this time unfortunately. However, we will be working on a variety of mounts for the 900’s very soon!

  • Doug Elmore

    Will these work with an older Polaris RZR? I have a 2012 RZR 900 XP that I’d like to outfit with a cooler and lockdowns.

    Thank you.

    Doug Elmore

Leave a comment

Please note, comments must be approved before they are published