Switch-Blade Instructions

Switch-Blade Instructions
Our Switch-Blade connector is designed to make wiring in a typical rocker switch much simpler.
Simply plug the switch into the Switch-Blade connector and match the colored wires on the back to the PWR-LINK Distribution block or your vehicle / accessory.
First identify which switch you are using and order the correct Switch-Blade connector for your application. We currently offer connectors for 5 or 6 pin switches. 8 pin Switch-Blade Connectors coming soon.






If using our PWR-LINK Power Distribution System, simply match the colors together for the 3-Pin connector. The circuits are fused and have relays to reduce load on switches.
Ignition power is run from the PWR-Link so only three wires (Red, Black, White) are needed.
Ignition power is run from the PWR-Link so only three wires (Red, Black, White) are needed.
If you have any questions or issues please reach out to us by clicking here and submitting your message.