Which Coolers fit in a Polaris RZR?
So which coolers fit? Well first lets go over the different RZR beds for different models.
1) Polaris RZR XP 1000 / XP Turbo Models
2) Polaris RZR Turbo S Models
*Notice the difference in cage designs between the XP and Turbo S mode
3) Polaris RZR 900 / 900 S / 1000 60 inch / 1000S (Pretty Much any 900 XP or Trail Models)
4) Polaris RZR Pro XP / Turbo R Models
Next we'll get to which coolers we like most and have built mounts for.
Cooler Options:
Yeti 24 Roadie - $199.99
Yeti 35 - $249.99
Ozark Trail 26 - $88.00
Ozark 35 - $97.00
Each of the models above are set up a bit differently and will only fit certain size cooler / toolbox combo's.
Use the table below to reference which coolers fit what model:
| Cooler | | 900 Model | | XP 1000 / Turbo S | | Pro XP / Turbo R | |
| Ozark 26 | ✔ | ✔ | ✔ |
| Ozark 35 | ✔ | ✔ | |
| Yeti 20 | ✔ | ✔ | ✔ |
| Yeti 24 Roadie | ✔ | ✔ | ✔ |
| Yeti 35 | ✔ | ✔ | ✔ |
| RTIC 20 | ✔ | ✔ | ✔ |
| Lifetime 28 | ✔ | ✔ | ✔ |
| Titan Deep Freeze 20 | ✔ | ✔ | ✔ |
| Plano 21 | ✔ | ✔ | ✔ |
| Plano 32 | ✔ | ✔ | ✔ |
| Amazon 20 | ✔ | ✔ | ✔ |
| Grizzly 20 | ✔ | ✔ | ✔ |
| Grizzly 40 | ✔ | ||
| Orca 20 | ✔ | ✔ | ✔ |
| Orca 26 | ✔ | ✔ | ✔ |
| Orca 35 | ✔ | ||
| Canyon 22 | ✔ | ✔ | ✔ |
| Canyon 35 | ✔ |
*Note: We tested each cooler with the RIGID Toolbox installed (Excluding 900 models) using our toolbox mounts. Some coolers may fit by themselves in the bed, but we tend to break things on the trail and tools are a must for us.)
Please let us know if you've tried any additional cooler models in your RZR! We'd love to hear from you.
Here is a look at our Ozark 26 Qt Mount for RZR XP 1000 / Turbo:
To install any of our brackets simply open the cooler lid, slide the appropriate mount in the side slots, then anchor in place with a lock n ride.
1) We use quality CRS Steel when building our mounts
2) We powder-coat all of our mounts at no additional charge
3) We weld and gusset nearly all of our mounts to add strength
4) We developed our own Lock and Ride compatible mounting system to make things more secure and easier to use.
"The Stud" Our Anchor System
Secure Your Load
We suggest adding our anchors with these mounts. For more info click the button below to check out "The Stud" lock n ride system.
Get More Utility
Add our Billet Anchor Knobs for tie down capability or just because you like the look!
7 comments
Litt Industries
Hi Doug,
We do not have any mounts for your 900 at this time unfortunately. However, we will be working on a variety of mounts for the 900’s very soon!
Doug Elmore
Will these work with an older Polaris RZR? I have a 2012 RZR 900 XP that I’d like to outfit with a cooler and lockdowns.
Thank you.
Doug Elmore
Leave a comment
All comments are moderated before being published.
This site is protected by hCaptcha and the hCaptcha Privacy Policy and Terms of Service apply.