HD Rigid Toolbox Mounts for RZR Pro R / XP / Turbo R
Securely mounts the 22 inch RIGID toolbox (Model #:221733) in the very rear of the RZR bed tray.
Drilling the box and adding feet is NOT necessary for the Pro or Turbo R Models!
*NOTE: If ordering the toolbox brackets AND any cooler brackets with anchors only one set is needed.*
FITS: 2020+ Polaris RZR Pro R / XP / XP4 / Turbo R
DOES NOT FIT:
Polaris RZR 2014-2022 XP 1000 / Turbo / Turbo S / 60" / 900 Models
PRO R / Turbo R BED
Our cooler and Toolbox mounts use two mounting points for each side or a total of (4). They use the lock n ride holes pictured here. We suggest using our "Stud" anchors for a more secure mounting point, and ease of use.
Toolbox and Cooler Compatible
We designed all of our mounts to allow room for a cooler and the RIGID toolbox in the bed together. The toolbox lid can still be opened with the cooler installed.
Note: Mount the toolbox first then stack the cooler mount on top.
Need a Toolbox?
NEED LOCK N RIDE ANCHORS?
"The Stud" Our New Lock N Ride System
The most secure lock n ride anchor. Period. Our 3 piece design locks in place securely allowing for coolers, toolboxes, etc... to be tied down. Install once and enjoy a stud-that-stays.
Slot Bore: 5/16"